Two new Design in Cold Formed Steel Seminars Scheduled

Our sister organization, the Cold-Formed Steel Engineers Institute Canada is hosting a Design in Cold Formed Steel Seminar. Below are the details.

Design in Cold Formed Steel: Using the North American Specification for the Design of Cold-Formed Steel Structural Members CSA Standard S136-12

When & Where

Tuesday, November 25, 2014 in Fredericton, NB

Wednesday, November 26, 2014 in Halifax, NS

Registration:

CFSEI Members - $225

Non-Members - $275

Each registrant will also receive a comprehensive set of lecture notes full of explanatory material and worked examples.

Registration is limited to 50 people on a first-come first-serve basis.

About the Seminar

The primary objective of this seminar is to make the designer conversant with the latest edition of CSA Standard S136-12 (North American Specification for the Design of Cold-Formed Steel Structural Members). This is a harmonized document between Canada, the US and Mexico, and supersedes the 2007 edition (including Supplement 2010). The Specification was developed through a joint effort of the American Iron and Steel Institute’s (AISI) Committee on Specifications and the Canadian Standards Association’s S136 Technical Committee. In comparison to the 2007 edition of S136 (including Supplement 2010), a number of significant changes have been incorporated into the North American Specification, in part due to the harmonization process and in part due to latest research developments. 

Topics
The intent is to bring the participant up-to-date with the current design provisions contained in the new North American Specification for the Design of Cold-Formed Steel Structural Members (S136-12), highlighting significant changes from the 2007 edition of S136. As well, numerous illustrative examples will be presented.

• Introduction 
• Materials
• General Design Considerations
• Elements in Compression
• Members in Tension
• Members in Bending
• Members in Compression
• Combined Bending and Compression
• Connections
• Member Bracing
• Testing and Fatigue
• Direct Strength Method

Also, the latest Editions of the AISI North American Design Standards for Cold-Formed Steel Framing will be reviewed since these design standards are referenced by CSA S136 for use in Canada.

Registrants are encouraged to bring a copy of the S136-12 Standard to the seminar. If necessary, this can be purchased from CSA by telephone [416-747-4044, or 800-463-6727], E-mail [sales@csa.ca] or by visiting their web site at www.csa.ca.

Schedule
8:00 am     Registration and coffee
8:30 am     Seminar begins
10:15 am   Break
12:00 pm   Lunch provided
12:45 pm   Seminar resumes
2:30 pm     Break
4:30 pm     Seminar concludes

Who Should Attend

• Anyone involved in the design of cold formed steel structural members. This seminar will provide a quick and effective means of learning about the 2012 edition of CSA S136 (North American Specification for the Design of Cold-Formed Steel Structural Members).
• Anyone who would like the opportunity to have questions answered concerning all aspects of cold formed steel design.

Speakers

Dr. R.M. Schuster, P.Eng.
University of Waterloo
Waterloo, Ontario

Dr. S. R. Fox, P.Eng.
General Manager
Canadian Sheet Steel Building Institute
Cambridge, Ontario